Open Menu

The PURO F – the drop-arm awning

The models from the PURO range were designed for mounting in protected locations, such as under eaves or in a niche. In contrast to the ARCO and CANTO window awning systems, in the PURO the exposed, uncovered fabric roller is mounted in two side bearings. The PURO F drop-arm awning features drop arms that tension the awning fabric by means of integrated springs. The screw connections on the drop arms are concealed, ensuring a more elegant look. The standard arm inclination is 140 degrees, and arms can be supplied in lengths from 60 to 150 cm.

Details

The PURO F is available as a single system with the following maximum widths:
Maximum 600 cm, drop arms from 60 to 150 cm

A radio-controlled motor is available as an optional extra, allowing the awning to be extended and retracted conveniently by remote control. The awning can also be supplied with a crank drive on request (lower price).

The PURO F comes in the standard colours traffic white (RAL 9016) or white aluminium (RAL 9006) – ask your specialist partner for advice.

Optional extras

Discover the optional extras for the PURO F window awning:F:

Control

Fully automated controls complement the electric drive and offer additional comfort and safety as sun and wind monitors.

Fabrics

Exclusive awning fabrics to suit every taste

Only the combination of premium awning technology and a weatherproof yet elegant awning fabric will make your awning unique to you.

LEINER fabrics are known both for their quality and for the wide selection of different patterns. Our range comprises more than 200 patterns from various colour schemes and many special fabrics – with a diversity of choice extending from classic block stripes through timeless, monochrome materials to modern stripes. Last but not least, LEINER's awning fabrics offer protection against UV rays of up to factor 80.

Have a browse through the LEINER Fabric planner or ask your specialist partner for advice.

Technology

PURO F wall mounting The PURO F can be mounted directly on the window, in the wall or on the ceiling.

Illustration: Wall mounting

Download

Further information about the PURO F window awning can be found in our window awning brochure, which is available to download (PDF).

What is...?

Extruded aluminium
x
Aluminium can be deformed under very high pressure. The extrusion process forces aluminium through a mould to produce profiles which can, for instance, be used as cassettes for cassette awnings.
Width of awning
x
The width of the awning is by definition greater than the width of the awning fabric.
Powder coating
x
LEINER aluminium components are almost always powder-coated. In powder coating, a coloured powder is sprayed onto the surface to be coated; then the powder is "baked on" by thermal treatment. Powder-coated surfaces are characterised by high resistance and colour fastness.
Ripples around seams and corrugations in fabric sheets
x
Before stitching, the awning fabric is doubled in the manufacturing process. When the fabric is rolled up on the fabric roller of your awening, different winding diameters are created around the seams. Because of the tension of the folding arms as well as the sagging of the profiles, corrugations result. If they are exposed to rain, especially acrylic fabrics strongly tend to corrugations.
Acrylic fibre
x
Awning fabrics are mainly manufactured with acrylic fibres. These are highly resistant to the strong effect of sunlight. They are also very tear-resistant and colour-fast.

LEINER-ABC